Protect your investment with Hotsy's 24-point Tune-Up for your hot or cold water pressure washer. |
||
| 1. Check pump pressure 2. Check pump volume 3. Check nozzle, replace if worn* 4. Adjust belt tension 5. Check pump crankcase oil & top off if required* 6. Check hoses for wear or damage 7. Check gun and wand for wear or damage 8. Inspect quick couplers 9. Check detergent supply & metering valve |
10. Check for coil scaling* 11. Check for coil sooting* 12. Check unloader adjustment 13. Inspect wire connections 14. Check thermostat for proper cycling 15.Check voltage & amp draw 16. Check oil burner or gas burner for wear or corrosion 17. Adjust burner for best combustion 18. Check for contaminated fuel tank & flush if required |
19. Check fuel filter, clean or replace if required 20. Check fuel pressure or gas pressure 21. Check engine crankcase oil & top off if required 22. Check engine air filter, clean or replace if required 23. Check engine spark plugs & replace if required 24. Check engine fuel filter, clean or replace if required *Cleaning is extra on these items. Parts at additional cost. |
FSI, Inc. covers most of the central valley of California including Bakersfield, Delano, Tulare, Coalinga, San Luis Obispo,Paso Robles, Atascadero, Visalia, Kingsburg, Kings County, Hanford, Mendota, Fresno, Clovis, Madera, Yosemite, Reedly and surrounding counties.
Contacts:
Fresno and surrounding area - Mark Lantrip
cell: 559-352-0017
Bakersfield and surrounding area - Robert Maxwell
cell: 661-343-2170
